Crow Alert Smart Wi-Fi Wireless Home Security 4G Alarm System

This smart alarm system sets up in minutes and protects a home or office without a monthly contract. The control panel connects to your Wi-Fi router and is also GSM-enabled, so with a SIM card installed (not included) it can call and text any number you register. It pairs wirelessly with the included motion sensor and magnetic contact sensor, and when either trips it sounds a high-decibel siren and pushes an instant notification to the free app. A built-in microphone and speaker let you listen in and speak through the panel, and you can record a 20 second voice message that plays with the siren. Arm and disarm from the app, on a schedule, with a passcode on the panel, or with the two remote controllers and two RFID tags. A tamper switch triggers the alarm if the panel is moved, and the app syncs with Alexa and Google for voice status checks. Sensors mount with adhesive pads or the included screws.

• Smart alarm system syncs to a router to alert you anywhere via the free phone app
• High decibel siren and instant app notifications are sent when sensors are tripped
• 2-way audio with built-in microphone and speaker to scare intruders or talk with family
• Schedule arm and disarm times and activate or deactivate the alarm in the app
• Quickly arm or disarm with passcode or included remote controllers and RFID tags
• Control panel wirelessly syncs to included motion sensor and magnetic contact alarm
• Insert a SIM card (not included) to receive phone calls and SMS messages too
• Tamper switch will trigger alarms if the panel is moved from its installed location
• Record 20-second alarm voice messages that will play when the alarm is triggered
• App can sync with Alexa or Google to provide quick verbal updates
• Install units with easy self-adhesive pads and included mounting screws
• Control panel powered by a built-in rechargeable battery
• Motion sensor and door alarm powered by included button cell batteries
• Note: A SIM card MUST be installed to receive phone calls and texts from the system.

• One (1) Wireless Control Panel
• One (1) Motion Sensor
• One (1) Magnetic Contact Sensor
• Two (2) Remote Controllers
• Two (2) RFID Tags with Keyrings
• Four (4) Mounting Screws
• Four (4) Screw Anchors
• Mounting Adhesive Pad for Magnetic Contact Sensor
• Mounting Bracket for Motion Sensor
• Micro USB Cable
• USB Block Charger
• Reset Key
• Instruction Manual

• Control Panel
• Power Supply: Micro USB 110/220VAC to 5V 1000mA
• Backup Battery: 3.7V 500mAh Rechargeable Lithium Battery
• Consumption: <55mA@normal
• Radio Frequency: 433Mhz
• GSM: 850/900/1800/1900MHz
• Wi-Fi: IEEE802.11b/g/n
• Operation Temperature: 14~131°F
• Relative Humidity: <80%RH
• Wireless Coding: EV1527
• Casing Materials: ABS Plastic
• Magnetic Contact Sensor
• Power Supply: DC 3V (CR2032 Lithium Battery x1)
• Standby Current: <1uA
• Alarm Current: <15mA
• Transmitting Distance: <80m (Open Area/No Interference)
• Radio Frequency: 433Mhz
• Operation Temperature: 14~131°F
• Motion Sensor
• Power Supply: 1.5V AA Battery x3
• Wireless Frequency: 433M Hz
• Wireless Transmitter Code: 1527
• Standby Current: <15uA
• Alarm Current: <25mA
• Pet Immunity: <15kg
• Detection Scope: <12m/110°
• Transmitting Distance: 80m (Open Area and No Interference)
• Casing Materials: ABS Plastic
• Operation Temperature: 14~131°F
• Humidity: 5%--95% non-condensing
• Remote Controller
• Power Supply: Micro USB+5VDC/1000mA
• Light: LED indicator light
• Battery: Cell Battery CR2025
• Consumption: <5uA(standby)/ <15mA(working)
• Wireless Frequency/Code: 433Mhz /EV1527
• Transmission Distance: 80m (in open air)
• Operation Temperature: 14~131°F
• RFID Tag
• Radio Frequency: 125kHz
• RFID Chip: 4100/4200
• RFID Frequency: 125KHz
• Operation Temperature: 14~131°F